Interior doors do not come in one universal size. In many U.S. homes, common hinged interior door widths include 24, 28, 30, 32 and 36 inches, while 80 inches (6'8") is a common residential height. Taller 84-inch and 96-inch doors are also available for some contemporary and custom projects.
The right size depends on the room, existing opening, door configuration and whether you are ordering a replacement slab or a complete prehung unit. Bedroom doors, bathroom doors and closet doors may use different widths depending on the layout and access requirements.
Before ordering, make sure you know which dimension you are working with. The door slab, prehung unit, finished opening and rough opening are related, but they are not the same measurement.

Standard Interior Door Sizes
Interior door sizes vary by room, door construction and project requirements. Common residential widths range from 24 to 36 inches, with 30- and 32-inch doors frequently used for bedrooms and other occupied rooms. An 80-inch door is a common residential height, while taller doors may be specified for higher ceilings or custom interiors.
Door thickness also varies by product construction and system. A 1⅜-inch slab is common for many residential interior doors, but thicker doors are also available. Always confirm the selected product specification rather than assuming thickness from width or height alone.

Common Interior Door Width, Height and Thickness
| Dimension | Common Interior Door Sizes | Notes |
|---|---|---|
| Width | 24", 28", 30", 32", 36" | The appropriate width depends on the room, layout and required clear opening. |
| Height | 80" is common | 84" and 96" doors are also available for some taller or custom interiors. |
| Thickness | 1⅜" is common for many residential interior door slabs | Thickness varies by construction, product line and door system. |
Rough Opening Sizes
A rough opening is the framed wall opening that receives the door unit. It is larger than the door slab and the assembled prehung unit so the frame can be positioned, shimmed and leveled during installation.
Do not assume that one rough-opening formula applies to every interior door. Required dimensions vary by frame construction, door configuration and manufacturer. If you are framing a new opening or ordering a prehung door, use the rough-opening dimensions specified for the selected door system.
For more detailed sizing examples, see our Door Rough Opening Sizes – Complete Guide.
Interior Door Sizes for Bedrooms and Other Rooms

Bedroom Door Sizes
Bedroom doors in many U.S. homes commonly use 30- or 32-inch widths with an 80-inch height, although older homes and custom projects may use different dimensions. Wider openings can make everyday access and moving furniture easier, while taller doors may be selected to suit higher ceilings or a contemporary interior design.
For replacement projects, measure the existing slab, frame or opening rather than assuming the bedroom uses a standard size. For new construction and multi-unit projects, confirm door sizes against the architectural door schedule, wall construction, finished floor level and applicable accessibility requirements before production.

Bathroom and Closet Door Sizes
Bathrooms and closets may use narrower doors where space is limited, but the correct width depends on the room layout, required clear opening and door configuration. Pocket doors, bifold and sliding closet doors have different opening and hardware requirements from standard hinged doors, so their dimensions should be checked against the specific door system.
How to Measure for Interior Doors
Start by identifying what you are replacing. If you are replacing only the door slab, measure the existing slab’s width, height and thickness, and check the hinge and lock locations.
If you are replacing a complete prehung door, measure the rough opening after removing the casing where necessary. Record the opening width at the top, middle and bottom, and measure the height at multiple points. Use the smallest measurements when checking the available opening.
Also measure the jamb depth and confirm the door handing and swing. For a new opening, use the selected manufacturer’s rough-opening specification before framing or ordering the door.
Step-by-Step Guide
Width
- Measure the opening at the top, middle and bottom.
- Record the smallest measurement.
- Do not round the measurement to a nominal door size until you have checked the selected door and frame specification.
Height
- Measure the opening height at more than one point.
- Record the smallest measurement.
- Account for the finished floor condition and the clearance required by the selected door system.
Thickness
- Measure the existing slab thickness when replacing a slab.
- For a prehung door, also confirm the jamb depth and finished wall thickness.
Slab vs. Prehung Interior Doors: Which Size Are You Measuring?
A slab door is the door panel itself, while a prehung door is supplied as a unit with the door already mounted in a frame. This distinction matters when checking dimensions because the nominal slab size, overall prehung unit size and required rough opening are not the same.
For a slab replacement, confirm the existing door width, height and thickness, along with hinge locations and lock preparation. For a prehung replacement or new project, also confirm the rough opening, jamb depth, wall thickness, handing and the manufacturer’s required opening dimensions.
For projects with multiple interior doors, these details should be coordinated in the door schedule before production so that standard sizes and custom-size exceptions are clearly identified.
Interior Door Configurations That Affect Sizing

Interior door configurations do not all use the same sizing method. A standard hinged door, double French door, bifold door and pocket door may use similar nominal slab heights, but their total opening, frame and hardware requirements can differ. Confirm the complete door system before using a nominal slab size to plan an opening.
French and Double Interior Doors

French and double interior doors use two door leaves, so the total unit and opening width depend on the size of each leaf and the selected frame system. When planning a double-door opening, confirm the active and inactive leaf configuration, frame dimensions and hardware requirements rather than calculating the opening from the slab widths alone.
Closet Door
Closet door sizing depends heavily on the operating system. Hinged, bifold, bypass and pocket-style closet doors can require different panel widths, tracks, frames and clearances. Check the selected system before ordering or framing the opening.
FAQs About Common Door Sizes
Common residential interior door widths include 24, 28, 30, 32 and 36 inches, with 80 inches being a common height. The appropriate size depends on the room, door configuration, existing opening and project requirements, so always verify the actual opening before ordering.
In many U.S. architectural door schedules, a call size such as 2880 commonly refers to a nominal door size of 2'-8" wide by 8'-0" high, or 32 × 96 inches. However, drawing conventions can vary by project, so always check the drawing legend, door schedule and manufacturer specifications before ordering.
A nominal door size is the stated size used to identify a door or door system, while the rough opening is the framed wall opening that receives the complete unit. The actual slab, frame and overall unit dimensions can differ from the nominal size. Rough-opening requirements also vary by door and frame system, so always use the selected manufacturer’s specifications before framing or ordering.
Where the ADA Standards apply, door openings generally must provide at least 32 inches of clear width. For a swinging door, clear width is measured between the face of the open door and the stop with the door open 90 degrees. This is a clear-opening requirement, not simply a nominal door-slab width. Always confirm the accessibility and building-code requirements that apply to the specific project.
Need Help Confirming Your Interior Door Sizes?
Planning a renovation, new home or multi-unit project? George can help check your interior door sizes before production.
For replacement doors, send your existing door or opening dimensions and a few photos. For new construction or project orders, you can share your floor plan or door schedule, including opening sizes, wall thickness, handing and quantities.
Our team can help coordinate standard and custom interior doors with the rest of your project before quotation and production.





